Skip to Content
UA741 (LM741 Alternative) op amp

Price:

GH¢ 3.00
                          ​ ​ ​ ​ ​ info@hub360.cc     0596764151


    2. Shop
    3. UA741 (LM741 Alternative) op amp
    USB multifunction tester with current and voltage detector
    USB multifunction tester with current and voltage detector
    GH¢ 50.00
    GH¢ 50.00
    DSTV Decoder DC jack Adapter
    DSTV Decoder DC jack Adapter
    GH¢ 4.00
    GH¢ 4.00

    UA741 (LM741 Alternative) op amp

    https://gh.hub360.cc/web/image/product.template/11853/image_1920?unique=1c4a6b4

    GH¢ 3.00 3.0 GHS GH¢ 3.00

    ₦ 220.00

    Not Available For Sale

    (GH¢ 0.00 / Units)

    This combination does not exist.

    Contact Us


    The UA741 is a general-purpose operational amplifier featuring offset-voltage null capability. The high-gain, internally frequency-compensated op-amp is designed to operate from a single or dual power supply over a wide range of voltages. It is an ideal choice for applications requiring low input bias current, low offset voltage, and high input impedance. Key Features:
    • Internally frequency compensated for unity gain
    • Large signal voltage gain of 106 dB
    • Wide power supply range: ±10V to ±15V
    • Short-circuit protection
    • Offset-voltage null capability
    • Low input bias current: 80 nA (typical)
    • High input impedance: 2 MΩ (typical)
    • Low power consumption
    • Compatible with standard LM741 pin configurations
    Technical Specifications:
    • Supply Voltage Range: ±10V to ±22V
    • Input Offset Voltage: 1 mV (typical)
    • Input Bias Current: 80 nA (typical)
    • Input Impedance: 2 MΩ (typical)
    • Output Impedance: 75Ω (typical)
    • Large Signal Voltage Gain: 106 dB (typical)
    • Unity-Gain Bandwidth: 1 MHz (typical)
    • Slew Rate: 0.5 V/µs (typical)
    • Common Mode Rejection Ratio (CMRR): 90 dB (typical)
    • Power Supply Rejection Ratio (PSRR): 96 dB (typical)
    • Operating Temperature Range: 0°C to +70°C
    • Package Types: 8-pin PDIP, SOIC, TO-99
    Applications:
    • Signal conditioning
    • Voltage followers
    • Integrators and differentiators
    • Active filters
    • General-purpose analog applications
    • Audio amplifiers
    • Industrial controls
    • Data acquisition systems
    Usage:
    1. Connection:
      • Connect the power supply to the V+ and V- pins.
      • Connect the input signal to the inverting (−) or non-inverting (+) input pin.
      • Connect the output to the desired load or next stage of the circuit.
      • Use the offset null pins if necessary to adjust the input offset voltage.
    2. Configuration:
      • Configure the op-amp in the desired configuration (e.g., voltage follower, inverting amplifier, non-inverting amplifier) by connecting the appropriate feedback components.
      • Adjust the gain and frequency response using external resistors and capacitors.
    3. Protection:
      • Use proper decoupling capacitors on the power supply lines to reduce noise and improve stability.
      • Ensure the op-amp is within the recommended supply voltage range to prevent damage.
    Caution:
    • Observe proper handling procedures to avoid electrostatic discharge (ESD) damage.
    • Ensure the input signals are within the common-mode voltage range to prevent improper operation.
    • Avoid exceeding the maximum ratings for voltage, current, and temperature.
    Datasheet: For detailed technical specifications, refer to the UA741 Op-Amp Datasheet.
    No Specifications